The power and ground can be provided by the OBD
Usually the OBD interface is located in the driver floor room
Remove the cover of the a-pillar and route the cable along the a-pillar to the floor room
Remove the OBD plug and attach the t-taps to the OBD cables (1 x power, 1 x ground) or use an OBD-adapter
Connect the device to the t-taps
IMPORTANT: Not every OBD interface provides constant power – please check with the OEM, if constant power is available.
IMPORTANT: Please make sure, that the cable routed over the a-pillar does not interfere with the side airbag system.
IMPORTANT: The OBD adapter is not part of the delivery package by Bosch and must be acquired by the MSP.
Required tools (may be different depending on your vehicle):
Pliers
Prying tool
