Open the dome light with a prying tool
Locate the power plug and ensure constant 12V power
Attach 1 x t-tap to the ground wire and 1 x t-tap to the power wire using pliers
Connect the device to the t-taps
Optional: Use insulation tape or zip ties to secure the remaining device cable in the dome light compartment
Reattach the dome light
IMPORTANT: The correct connector must match the t-taps placed on the vehicle wire harness: wire labeled (GND) goes to the vehicle ground wire (brown in this example), and wire labeled (+12V) goes to vehicle power (red in this example).
IMPORTANT: Please make sure that the device cable is not folded or squeezed by the dome light compartment.
Required tools (may be different depending on your vehicle):
Pliers
Prying tool
